主 页 产品信息 系统集成 市场销售 联系我们 技术支持 关于我们
Miniature Temperature/Process Indicator
V116, V132

Provides a 4 Digit Display and Alarm Output from RTD, Thermocouple or DC Inputs

  • Field Configurable Input for Thermocouple, RTD, mV, and 4-20mA Signals
  • Three Field Configurable Alarm Setpoint with One or Two Alarm Outputs
  • Bright Green 4 Digit (9999) LED Display, Programmable for Engineering Units
  • Combination Alarm Functions, Alarm Blocking and Programmable Latching/Non-latching
  • NEMA 4X Front Panel with Tactile Front Panel Configuration Buttons
  • Wide Ranging Power Supply: 85 to 264VAC or 20 to 29V DC or AC
  • Three Year Warranty
  • Datasheet

The VisiPak models V116 and V132 are compact, 4 digit indicators (with alarms) that fit 1/16 and 1/32 Din cutouts, respectively. They accept temperature inputs from J, K, T, L, N, R, S, C, B, and Platinell II type thermocouples and two-wire Platinum 100 Ohm (Pt100) RTDs. Process variables such as 4-20mA or ranges within -12 to 80mV can also be measured. Other thermocouples such as D and E types or custom curves can be configured at the factory. Voltages ranges up to 0-10V can be measured with the optional (model SUB2-1V1) adapter.

Three programmable setpoint alarms can be field configured as high or low, non-latching and high or low or new, latching alarms. The new alarm indicates the situation when a latched alarm has not been acknowledged and the measured value crosses the setpoint trip level for the second time. Alarm hysterisis (deadband) can be configured from 1 to 9999 process variable units.

The alarms can be linked to either the relay output or the digital I/O terminals. The digital I/O terminals can be configured to accept alarm acknowledgment input (e.g. remote push button). Or when configured as an output, those terminals will provide a TTL signal or drive an optional (model SUB2-1R7) relay. These alarm outputs can be configured in combination (e.g. one or all three alarms linked to the relay) and will operate in fail-safe (e.g. normally energized) or non-fail-safe modes. Additionally, the display can be configured for password protection, limiting access to any or all functions.An alarm blocking function is also configurable to prevent alarms from tripping during a systems initialization or start-up.

Thermocouple, two-wire RTD and mV inputs can be directly input into the indicator. Current signals such as 4-20mA are input using the 2.49W shunt resistor, which is included with the indicator and mounting hardware. Other shunt resistors can be used to measure higher current levels as long as the signal produced is within the -12mV to 80mV input range. Similarly, voltage inputs such as 0-10V can be measured using the optional input adapter or voltage divider (model SUB2-1V1). The four-digit display (9999) can be configured to match the input signal range to the preferred engineering units. Offsets and two point slope adjustments are fully programmable to compensate for sensor variances.

地址:辽宁省大连市ʾ区街3号¥һԪ101室(116033)

市场部sales@actionio.com.cn
电话:(86)0411-82650498 82597851 传真:0411-82650478
Copyright © Dalian Action Instruments Co., LTD
产品事业部support@actionio.com.cn